Published at Friday, March 01st, 2019 - 15:11:17 PM. Privacy Screens. By Lancelot Voisin.
Estimating the Cost of Wood Privacy Fence Installation : Fence costs are calculated as a cost per linear foot. The easiest way to estimate the cost is to determine the cost of a single fence panel and then multiply that cost times the number of panels required to achieve the total length of the fence. First, measure the perimeter of the area to be enclosed - while doing this make note of any special situations that will influence to cost such as gate(s) or difficult terrain. If a fence already exists that will be replaced with new materials then simply count the number of fence panels that are present. Wood privacy fences are almost always spaced with posts 8 foot apart on center (this means the measurement from the center of one post to the center of an adjacent post is 8 feet) but always measure to confirm. Lumber is available in standard 8 foot lengths and offers a balanced solution of cost and strength. Spans longer than 8 feet will likely have problems with sagging unless the 2x4 cross beams are upgraded to 2x6 dimension - this also changes the appearance of the fence panel. Spans shorter than 8 feet are usually not necessary, the fence will be stronger but materials cost increase substantially. If there is a need to set the posts at some other length, be sure to choose an increment of 2 feet (i.e. 6 foot, 8 foot, 10 foot, 12 foot etc... ) otherwise installation will require every cross beam to be cut to length.
With this information, the total materials cost for wood privacy fence installation can be put into the fence cost calculator. Using the typical selections that make up more than half of all privacy fences in the US: · 8 foot UC4A pressure treated pine 4x4 wood post (quantity: 1, approx. $8 ea.) · 8 foot UC3B pressure treated pine 2x4 wood fence rails (quantity: 2, approx. $4 ea.) · 6 foot 3.5 inch wide western red cedar pickets (quantity: 24, approx. $2 ea.) · 3 ½ inch 16d galvanized ring shank nails (quantity: 8, approx. $1) · 1 ¾ inch galvanized ring shank nails (quantity: 100, approx. $1) · 1.5 cubic feet of crushed gravel (quantity: 1, approx. $5) This brings the cost of the typical wood privacy fence installation to approximately $71 per panel, or just below $9 per linear foot. Other common fence designs will increase the cost from this baseline estimate of the privacy fence cost. The good-neighbor fence (where the pickets alternate sides of the fence, either picket by picket or panel by panel), shadowbox fence, and board-on-board fence styles both increase the number of pickets. Cap and trip fence style has the clean look of a uniform top edge between each post with the added cost of the top rail. Lattice top privacy fences of course add the cost of the lattice. This estimate is for materials cost only, if you use a contractor to do the work the total cost of the privacy fence installation project will increase by at least double. Constructing a wood privacy fence is within the capability of the typical homeowner, a solid three day weekend of work with two guys can finish a privacy fence around the typical backyard and use the money saved on refreshments to enjoy a job well done.
Any content, trademark’s, or other material that might be found on the Proxifeed website that is not Proxifeed’s property remains the copyright of its respective owner/s. In no way does Proxifeed claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.