Published at Wednesday, February 27th, 2019 - 23:52:46 PM. Fence. By Chere Charlet.
Adding or Changing Fence Rail: I have had the most success changing a fence rail by leaving the fence panel attached to the post. Use a sawzall with a metal cutting blade. Slip the blade in between the rail and the post so you can cut the nails or the screws. Use a Wonder Bar and a hammer so that you can wedge it between the rail and the fence board. Pry the fence board away from the fence rail. Follow the same procedure with all the fence boards. Take the fence rail out. Cut the new one to the same length. Drive the nails through the fence picket leaving the nail in. Insert the rail. Hammer to nails back into the fence rail. You then can use 3 1/2 inch hot dipped galvanized nail to hammer through the rail into the fence post.
Cleaning: A few reasons why you would need to clean your vinyl fence would be: dirt and/or grass from the ground accumulating on the fence due to cutting the grass, leaves or other debris after a storm and rarely; you will notice a type of chalk build up develop on parts of the vinyl fence. These reasons are not major and are easily cleaned as explained below. The majority of vinyl fences can be cleaned very easily by just spraying the fence down with a water hose; however, if there are some tough stains that a water hose does not take care of, just follow the method below and your fence will look brand new every time you clean it! To prepare for cleaning a vinyl fence, you will want to decide if you are going to use a bucket of soapy water or a vinyl cleaning solution (can be purchased at your local hardware store) or a combination of both. If you are using a bucket of soapy water, you will want to fill the bucket with water to your desired amount and mix an environmentally safe cleaning solution in the bucket. (TIP: If it is environmentally safe,... It is vinyl fence safe) After you have your bucket of soapy water, all you must do now is get your soft cloth rag wet via the water in the bucket and wipe down the areas of the fence that need wiped down. If you are using a spray bottle of vinyl cleaning solution, just spray the areas of the fence that need cleaned and wipe with a dry soft cloth rag. When you are finished cleaning an area of the fence, rinse it off with a water hose and allow it to air dry.
Any content, trademark’s, or other material that might be found on the Proxifeed website that is not Proxifeed’s property remains the copyright of its respective owner/s. In no way does Proxifeed claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.