Published at Thursday, February 28th, 2019 - 07:14:37 AM. Fence. By Chere Charlet.
Cleaning: If you want to give your children a chore to do around the house, now is the time. Cleaning a chain link, steel or aluminum fence is very easy and can be performed by almost anyone. Most of the time you can clean your metal fence by simply spraying it off with a water hose; however, if you come across some tough stains or areas that need a little scrubbing, the following advice should do the trick. First you will want to prepare a bucket of soapy water. To do this, simply fill a bucket with warm water and mix with any cleaning solution that will not increase chances of rust development. You will then want to take your soft bristle scrub brush and dip it in the soapy water. After the brush is wet, simply scrub the areas of the fence that need cleaning and rinse by spraying off with a water hose... Its that easy.
Adding or Changing Fence Rail: I have had the most success changing a fence rail by leaving the fence panel attached to the post. Use a sawzall with a metal cutting blade. Slip the blade in between the rail and the post so you can cut the nails or the screws. Use a Wonder Bar and a hammer so that you can wedge it between the rail and the fence board. Pry the fence board away from the fence rail. Follow the same procedure with all the fence boards. Take the fence rail out. Cut the new one to the same length. Drive the nails through the fence picket leaving the nail in. Insert the rail. Hammer to nails back into the fence rail. You then can use 3 1/2 inch hot dipped galvanized nail to hammer through the rail into the fence post.
Any content, trademark’s, or other material that might be found on the Proxifeed website that is not Proxifeed’s property remains the copyright of its respective owner/s. In no way does Proxifeed claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.